|
Buy front and rear springs to suit your weight below. Rider weight excluding Kit
Our experience says ,always consider going one spring heavier than you think |
These are the stock GPX shock ratings
|
|
|
Pair Fork springs to fit TSE 300 PRICE INCLUDES SHIPPING
Pair Fork springs to fit TSE 300 PRICE INCLUDES SHIPPING
Price includes shipping
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade 1.
- Cold coiled
- Heat treated
- Tempered
- Shot peened
- Ground ends
- Polished for reduced friction and smoother performance
- Part number etched
Pair Fork springs to fit ALL MODELS - NOT TSE 300 PRICE INCLUDES SHIPPING
Pair Fork springs to fit ALL MODELS - NOT TSE 300 PRICE INCLUDES SHIPPING
Price includes shipping
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade 1.
Cold coiled
Heat treated
Tempered
Shot peened
Ground ends
Polished for reduced friction and smoother performance
Part number etched
2022-2025 FREE POST New boxed K tech rearshock spring for LINKAGE TSE 300 YOU TELL US THE SIZE SPRING
2023-2025 New boxed K tech rearshock spring for LINKAGE TSE 300 YOU TELL US THE SIZE SPRING
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.
2022-2025 FREE POST New boxed K tech rearshock spring for TSE 250 and FSE 250, 300 and 450 FREE POST
K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.
2022-2025 FREE POST New boxed K tech rearshock spring for NON LINKAGE PDS TSE 300 YOU TELL US THE SIZE SPRING
New boxed K tech rearshock spring for NON LINKAGE TSE 300 YOU TELL US THE SIZE SPRING
NON LINKAGE PDS SPRINGS
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.
Rear Shock height lowering service for all 2021 -2025 models USING YOUR SHOCK
BUY THE LOWERING SHOCK OPTION . After you have bought Email us at [email protected] or message us on 07411364803 for our address
TELL US THE LENGTH THAT YOU WANT YOUR SHOCK TO BE . THIS MEASUREMENT SHOULD BE MEASURED FROM THE CENTRE OF THE TOP BOLT HOLE TO THE CENTRE OF THE UPPER BOLT HOLE.
POST YOUR SHOCK TO US
INCLUDE A WRITTEN NOTE OF THE MEASUREMENT AND THEN POST YOUR SHOCK TO US. INCLUDE YOUR FULL RETURN POST NAME AND ADDRESS. THE LENGTH WILL BE LOWERED TO YOUR REQUIRED LENGTH AND POSTED RIGHT BACK TO YOU. TURN AROUND 1 WEEK - 10 DAYS APPROX.
High quality OEM SHORTER shock for GPX linkage models
High quality OEM Shorter shock for GPX linkage models
Reduces the seat height to 860mm on 26 bikes
2 HOLE Rear shock for all GPX models BUT NOT TSE 300R IN STOCK
2 HOLE Rear shock for all GPX models BUT NOT TSE 300R
455 eye to eye length
475 eye to eye length
Photo is of 2021 - 2025 shock. 2026 shocks have silver reserviour and body.
Rear Shock height lowering service + KIT 2021 -2025 models USING YOUR SHOCK
Rear Shock height lowering service for all 2021 -2025 models USING YOUR SHOCK
KIT INCLUDES LOWERED SIDE STAND, LOWERING SERVICE ON YOUR SHOCK + BAR RISERS
BUY AND POST YOUR SHOCK TO US AT GPXMOTOUK ,RAKE HILL COTTAGE, PRIMROSE LANE, RAKE,LISS,HANTS,GU33 7PJ.
ITS SIMPLE
TELL US THE LENGTH THAT YOU WANT YOUR SHOCK TO BE . THIS MEASUREMENT SHOULD BE MEASURED FROM THE CENTRE OF THE TOP BOLT HOLE TO THE CENTRE OF THE UPPER BOLT HOLE.
INCLUDE THIS MEASUREMENT WITH A NOTE OF THE MEASUREMENT AND YOUR FULL RETURN POST NAME AND ADDRESS. THE LENGTH WILL BE LOWERED TO YOUR REQUIRIED LENGTH AND POSTED RIGHT BACK TO YOU. TURN AROUND 1 WEEK - 10 DAYS.
Top hat linkage steel insert for all GPX models
Top hat linkage steel insert for all GPX models
Plastic Sump guard that fits all GPX models inc linkage protector
Plastic Sump guard that fits all GPX models inc linkage protector
Suspension linkage triangle with bearings seals and steel inserts
Suspension linkage triangle with bearings seals and steel inserts
Pair of Swinging arm bearings LINKAGE CHASSIS TSE 250 FSE 300 FSE 450 , 250E
Pair of Swinging arm bearings LINKAGE CHASSIS TSE 250 FSE 300 FSE 450 , 250E
You need 4 per bike
Also replace your seals which stop the dirt and water getting to your bearings