Our experience says ,always consider going one spring heavier than you think
|
Front springs
|
Rear Springs
|
Pair Fork springs to fit TSE 300 PRICE INCLUDES SHIPPING
Pair Fork springs to fit TSE 300 PRICE INCLUDES SHIPPING
Price includes shipping
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade 1.
- Cold coiled
- Heat treated
- Tempered
- Shot peened
- Ground ends
- Polished for reduced friction and smoother performance
- Part number etched
Pair Fork springs to fit ALL MODELS - NOT TSE 300 PRICE INCLUDES SHIPPING
Pair Fork springs to fit ALL MODELS - NOT TSE 300 PRICE INCLUDES SHIPPING
Price includes shipping
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade 1.
Cold coiled
Heat treated
Tempered
Shot peened
Ground ends
Polished for reduced friction and smoother performance
Part number etched
2026 FREE POST New boxed K tech rearshock spring for NON LINKAGE PDS GPX BIKES YOU TELL US THE SIZE SPRING
2026 FREE POST New boxed K tech rearshock spring for NON LINKAGE PDS GPX BIKES YOU TELL US THE SIZE SPRING
NON LINKAGE PDS SPRINGS
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.
2026 New boxed K tech rearshock spring for LINKAGE GPX BIKES YOU TELL US THE SIZE SPRING
2026 New boxed K tech rearshock spring for LINKAGE GPX BIKES YOU TELL US THE SIZE SPRING
Choose the spring rate that's right from you.
Use our guide on the spring section of our shop page
K-Tech shock springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre-set and ground to length. Phosphate coating is then applied to protect against corrosion and then powder coated before the part number is applied. All springs are manufactured to DIN 2095 grade1.
1 HOLE Rear shock for all GPX models BUT NOT TSE 300R IN STOCK
1 HOLE Rear shock for all GPX models BUT NOT TSE 300R
430 centre eye to centre eye length
High quality OEM SHORTER shock for GPX linkage models
High quality OEM Shorter shock for GPX linkage models
Reduces the seat height to 860mm on 26 bikes
ZERO MILES BRAND NEW SHOCKS ONLY 2026 bike GPX Shock lowering EXCHANGE kit. SHOCK ,BAR RISERS + ADJUSTED STAND
This is a service for brand new bikes with 0 miles on the clock and is normally completed by the dealer. This service is to allow
2026 bike GPX Shock lowering service to 860mm seat height
2026 bike GPX Shock lowering EXCHANGE kit. SHOCK ,BAR RISERS + ADJUSTED SIDE STAND
Specialist GPX experienced Rear Shock height lowering service 2026 linkage models USING YOUR SHOCK
Rear Shock height lowering service for all 2026 LINKAGE models USING YOUR SHOCK
KIT INCLUDES LOWERED SIDE STAND, LOWERING SERVICE ON YOUR SHOCK + BAR RISERS
BUY AND POST YOUR SHOCK TO US AT GPXMOTOUK ,RAKE HILL COTTAGE, PRIMROSE LANE, RAKE,LISS,HANTS,GU33 7PJ.
ITS SIMPLE
10 DAYS - 14 days turn around. Might be faster
2026/7 new linkage triangle complete with new bearings , seals , sleeves and caps
2026/7 new linkage triangle complete with new bearings , seals and sleeves