GPX 250R TSE ALUMINIUM SUMP SHIELD ENGINE PROTECTOR
This is a custom UK handmade strong 4mm alloy sump guard that protects the TSE 250R ignition case and water pump as well as the bottom of the engine and chassis rails. Double TIG welded. It fixes with a bracket and two round button head supplied bolts. Captive nuts on bracket , so no difficultly fitting.
No linkage protector , but this is not needed for most riders. Any piece of thick plastic can be adapted to fit
"You will need to mount the sump plate using the rear bracket and then mark and drill the one front bolt hole to ensure it fits exactly correctly . We could do this for you , but for a completely correct and central fitting on your bike it is important that it is fitted to your bike. You will understand that if we drilled the bolt hole for you and it was in the wrong place due to factory variations ,it would cause a bad fitting. Use red loctite on all bolts".
So no mods to the GPX motorcycle at all. This sump shield also allows the bike to sit solidly and flat on motorcycle stands.
Smoothed externally .Internally bare welds which are not seen as hidden entirely by frame rails